Aqua Medic Ph 2001 Controller.
The pH controller 2001 C is a precision instrument to control the pH value in aquariums. In combination with a supply of CO2 (CO2 unit plus solenoid valve), the pH in an aquarium can be kept at a constant level and the CO2 supply to water plants can be ensured. The unit is supplied with a large LED display and the control range is digitally adjustable from pH 3.5 to 10.5. The pH controller has a BNC connection for pH electrodes. We recommend the use of the original Aqua Medic plastic shaft electrode. pH Monitor and Controller 2001 C
Price:£162.75
|  |
|
|
 |
Mv 2001 Redox Controller.
The mV Controller 2001 C is designed for monitoring and controlling the redox-potential (= ORP, oxidation-reduction-potential) in aquariums. The unit has a broad controlling range from a minus 500 to a plus 500 mV and a measuring range from minus 1000 to plus 1000 mV. It can be used to control the supply of ozone in salt-water aquariums and/or for the control of the nitrate removal in anaerobic biological filters (Aqua Medic Nitratereductor). The unit is supplied with a BNC connection for the mV probe. We recommend using the original Aqua Medic plastic shaft electrodes.Redox-potential (ORP) Monitor and Controller 2001 C
Price:£162.75
|  |
|
|
|
Lf 2001 Conductivity Controller.
The salt content of water can be determined using the electrical conductivity. A special feature of the Conductivity monitor and controller LF 2001 C is the broad measuring and control range, that is divided into 2 ranges: From 0 - 2.000 µS, the unit is used for monitoring desalinated water and freshwater, in the range 0 - 200 mS for brackish and salt water. Thus the unit can be used for the control of reverse osmosis units and breeding tanks with soft water and for the control of the salt content in marine aquariums. The unit is supplied with a directly connected, seawater resistant graphite electrode.Conductivity monitor and controller 2001 Requires Schuko Plug
Price:£236.25
|  |
|
|
|
T 2001 Cooler Controller.
The temperature controller 2001 C is delivered in 2 versions: 2001 HC for the control of heating systems and 2001 C for the control of cooling units. The control range varies from 0 - 50°C, with a precision of 0,1°C. The maximum wattage is 1.000 Watt for heaters and 600 Watt for coolers. The unit is supplied with a seawater proofed temperature probe.Temperature monitor and controller 2001 C Operation manual:: T Controller
Price:£136.50
|  |
|
|
|
T 2001 Heater Controller.
The temperature controller 2001 C is delivered in 2 versions: 2001 HC for the control of heating systems and 2001 C for the control of cooling units. The control range varies from 0 - 50°C, with a precision of 0,1°C. The maximum wattage is 1.000 Watt for heaters and 600 Watt for coolers. The unit is supplied with a seawater proofed temperature probe.Temperature monitor and controller 2001 C Operation manual:: T Controller
Price:£136.50
| |
|
|
|
Ph Control Set.
Comes with 2001 Ph controller.Solenoid valve and electrode.
Price:£252.00
|  |
|
|
|
Ph Computer Including Standard Electrode.
The temperature controller 2001 C is delivered in 2 versions: 2001 HC for the control of heating systems and 2001 C for the control of cooling units. The control range varies from 0 - 50°C, with a precision of 0,1°C. The maximum wattage is 1.000 Watt for heaters and 600 Watt for coolers. The unit is supplied with a seawater proofed temperature probe.Temperature monitor and controller 2001 C Operation manual:: T Controller
Price:£257.25
|  |
|
|
|
Redox Computer Including Standard Electrode.
The Aqua Medic mV Computer uses the same microprocessor technique as the pH Computer. Water proofed finger-touch keys are used to set the needed values and calibrate the electrode. The mV Computer is ideally suited to control the anaerobic biological filters (i.e. Aqua Medic Nitratereductor) with negative redox potential. It is also used to control the supply of ozone to the aquarium or monitor the aquarium water's redox- potential. All of these functions are possible due to the computer's broad measuring and controlling range of minus 500 to plus 1000 mV. A plastic shaft mV electrode, BNC fittings and calibration fluids are included.Microprocessor controlled Redox-potential (ORP) Monitor and Controller Requires Schuko Plug
Price:£278.25
|  |
|
|
|
Temprature Computer.
The Temperature Computer is a precise multi-functional, temperature controller. It includes a digital temperature sensor. The mode of operation can be set using the function keys, either as a heater or cooler controller. In "heating" mode actual temperature is adjusted to the set value using a pulse-packet control with an accuracy of 0.1°C. In "cooler" mode, the accuracy is 0,5°. The maximum useable wattage for heaters is 1000 watt and for coolers 600 watt.Microprocessor controlled Temperature Monitor and Controller
Price:£183.75
|  |
|
|
|
Light Computer.
The Aqua Medic Light Computer is designed to closely simulates nature's illumination for the aquarium. It is supplied with three separate programmable channels. Channel one controls the primary lamp (e.g. metal halide, maximum 750 Watt). Channel two controls the additional light (e.g. blue fluorescent, maximum 300-Watt). The third channel, the specialty of the computer, controls a night light with a maximum of 100 watt. The night-light's intensity is controlled using an internal program to simulate the natural 29-day moon cycle. These three channels therefor simulate the cycle dusk to dawn. This cycle is of major importance for many plants and animals in setting a rhythm in their reproduction cycle.A three-channel microprocessor control or around the clock aquarium lighting
Price:£288.75
|  |
|
|
|
Wave Computer.
Changing circulation is a must for a modern coral reef aquarium. The Aqua Medic Wave is a microprocessor programmed pump controller that can control three circulation pumps and one filter pump. The Wave can randomly activate between zero and three pump combinations. The activation frequency can be adjusted between 2 and 8 minutes. The fourth channel (filter pump) is continuously on. For feeding, especially invertebrates with plankton food, a feeding pause button knob can be activated; this stops all the pumps, including the filter pump, for approximately 10 minutes. An integrated light sensor ensures that during darkness no more than one circulation pump is active at a time. Power head pumps with a maxim of 100 watt per channel can be connected.A four channel pump controller for automatic circulation in the aquarium
Price:£183.75
|  |
|
|
|
Ph & Mv Electrodes.
Aqua Medic pH and Redox-potential electrodes are quality products for accurate measurement, and have a long trouble free operational use. Both types of electrodes are available in three versions: Standard electrodes -with plastic shaft Electrodes with plastic shaft and thread PG 13.5. These are pressure resistant up to 3 bar and can be used in plumbing or in closed versions of the Aqua Medic Nitratereductors and Calcium Reactors. An electrode holder is available as an option. It can hold up to four electrodes, and can be attached to the vertical or horizontal glass strips inside the aquarium, or mounted directly to the aquarium glass. pH and mV electrodes
|  | Size
|
|
|
|
|
|
|
Calibration Fluids.
The accuracy of all electrodes dependents on their calibration. To ensure accurate values, all electrodes need to be calibrated at regular intervals. To ensure that the fluid values used to calibrate the electrodes remain constant, regular replacement of these fluids is recommended. The following calibration fluids are available:pH: pH 4, pH 7 and pH 9Redox potential: 230 mVConductivity: 250 µS, 500 µS, 35 mS, 500 µsCleaning fluid for all electrodes Electrode calibration fluids
|  | Size
|
|
|
|
|
Aqualine C Processor Complete.
With the aqualine C, a new dimension has entered the in the aquarium measure and controlling technique. It is a complete solution for all measure and controlling requirements. It has the most modern microprocessor installed.Large LED display (Graphics Display) in an elegant aluminum frame. Basic Box, with connections for the probes Power Box with electrical connections for four separate functions Remote Control ( to select the menus) Also included in the basic set:one pH, Redox, temperature and conductivity probestwo float switchesChannels:pH/ Redox (ORP): 4 Channels for pH and Redox probes which can be programmed as needed ( 2 x pH and 2 x Redox).Temperature: used for heating and cooling. It can be programmed to lower the temperature during the night.Conductivity: used to measure fresh or salt water up to 70 mSLevel: 4 channels for float switches. They can be programmed for 2 circuits. A conjunction between conductivity and water level can be set.Additional functions:Timer: 4 timer channels can be programmed as time switch or as interval control.Statistics: The measured data of the last four weeks are saved and can be displayed graphically on the screen. You thereby can monitor the daily oscillations of the measured aquarium data Options: Additional Power Boxes can be added (in total 8 units) increasing the number of output channels to 32.Requires Schuko Plug
Price:£2,500.00
|  |
|
|
|
|
|
|
|
|
|
|
|
